Feature:
*Use this tool can locate accurate technical open Hyundai IX35,Sonata 8,New Sportage I30,Junas,Mdavante,QIYSL K5, Sorento Borrego car internal milling key car door lock, ignition lock and trunk lock. It can read out the teeth number., can be cut model key open - according to the model match the key;
*Operate easy, convenient, all stainless steel refined;
*Durable, provide wholesales;
Structure:
HY22 construction similar as TOY48,HY22 corresponding lock cylinder is 6 group half slice, shrapnel is 12pcs,4 tooth depth number, when cut the key,NO.1 cut the most shallow,NO.4 cut the most, it is also internal milling 4 track construction, divided into A,B group;
Instructions:
1.Put the tool insert into keyhole, test tooth bit, A, B group on the main panel show as: one side is 1,3,5 tooth bit have shrapnel, the other side 2,4,6 tooth bit have shrapnel, this car left rudder is to the rear of the drive, strength is the push rod to the clockwise direction, test 1,3,5 first, then test 2,4,6;
2. Firstly, use pry bar detect one by one, ignore the shrapnel which have large moving, in the small field elastic shrapnel is likely to be in place, looking for the kind of shrapnel didn't move, press to move it, then detect, if in place, also in the small field with elasticity, can feel the tool turn to you at the same time strength in the direction of rotation;
*Because of the lock is half slice, open one angle, still need to open B group, internal milling 4 track, open towards clockwise, all are B group stuck;
3. After all bittings unlocked, then read tooth, write down the read out tooth depth number, because of the lock is 12pcs half slice, open towards clockwise, B group is still stuck, need to return;
How to Cut Bitting:
# 1 closest to the key, cut off the spare part, that is the key we needed, after cut, must finish smooth transition, make the key inserted smoothly
|
