KT200 ECU Programmer is a complete tool for reading and programming ECU (engine control units) and TCU via OBD/Bench/Boot mode, the BDM/Jtag systems are also available. 

KT200 ECU Programmer Features:
1. KT200 ECU Programmer covering up to 5400 ECU, and over 500 TCU.
2. Support Audi/VW ECU Clone via Bench Mode pinout.
3. Bosch EDC17, MED17/ME17, and SIEMENS Pcr2.1(with Pinout also unlocking possibility) read and write in Bench Mode.
4. ECUHELP KT200 ECU Programmer Vehicle list is constantly updated and stays ahead of the industry.
7. The KT200 ECU programmer software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
8. Covering a full range of German, ECU Programmer, Japanese, American, and Chinese models.
9. Software Update: Update online free lifetime. No subscription, No annual Fee.

Function:

-Covering a full range of German, ECU Programmer  Japanese, American and Chinese models
-EGR & DPF Removal, IMMO OFF, releasing speed limit , mileage correction, Hot start or Cold Start Vmax, and so on.
-The list of vehicles is constantly updated, which keeps you at the forefront of the industry.
-Support Volkswagen Audi clone (local operation without sending data to manufacturers)
-ECU maintenance, Chip tuning, DTC code Removal, professional reading and writing equipment covering 99% of the models in the market.

1. Please note: KT200 offline workstation works with KT200 Full Version only. If your device is Auto version, please upgrade to full version first. 
2. If you have KT200 Basic Version Only, please contact us to pay $179 to update to Full Version, then you can work with the Offline Station too.

Offline workstation is additional accessaries to pay, please contact us for service if you need with

KM200 Full Version Software includes 10 licenses:
Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gearbox

KT200 has 2 versions:
1. Car version (Auto version)
2. Full configuration version
If you already have Auto Version, you can update to be full version by providing us S/N and order update service:

	Auto Version	Full Version
Car OBD	√	√
Truck OBD	√	√
Tractor OBD	×	√
Boat OBD	×	√
Motorbike OBD	×	√
Full System	√	√
BDM/JTAG	√	√
TOOL BOOT	√	√
Bench Mode	√	√
TCU Gear	√	√

Professional software for reading and programming the control units of:
CAR
TRUCK
MOTORBIKE
TRACTOR
BOAT
Additional TCU package available for Automatic Transmissions


Full Read And Write Via Pin Out in Bench Mode:
BOSCH EDC7
BOSCH EDC16
BOSCH ME9 / MED9

Full Read And Write Via Pinout in Bench Mode:
BOSCH MD1
BOSCH MG1
-FREESCALESPC5777
-AURIXTC29x
-STSPC58

Full Read And Write Via Pinout in Bench Mode:
BOSCH EDC17
BOSCH MED17 / ME17
SIEMEN SPCR2.1
(Unlocking also possible via pinout)

Full System Via Pin Out (Micro / Flash + EEPROM)of ECUs:
BOSCH
CONTINENTAL
DELCO
DENSO
MARELLI
SIEMENS
TEMIC
TEMIC

BDM EJTAG Modes For:
BDM MPC55x
BDM MPC56x
BDM MC32 / ZC32
BDM HC12 / S12x
JTAG NEXUS MPC / SPC56xx
JTAG NEXUS MPC55xx

JTAG RENESAS
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
JTAG NEC76F00xx
76F0038AGD
76F0038GD
76F0039AGD
76F0039GD
76F0040GD
76F0070
76F0070
76F0085

BOOT Modes:
-BOOT MODEC16729Fxxx
-BOOT MODE ST K-LINE / RX-TX / CAN
ST10F168
ST10F269
ST10F273
ST10F275
ST10F276
ST10F276
ST10F280
ST10F296
-BOOT Mode Tricore for micro
TC1724
TC1728
TC1738
TC1738
TC1762
TC1766
TC1767
TC1782
TC1791
TC1792
TC1793
TC1793
TC1796
TC1797
-BOOT Mode Renesas
SH7052
SH7054
SH7055
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
-BOOT Mode Mitsubishi
MH7202
MH7203
MH8102F
MH8105F
MH8106F
MH8202
MH8206F
MH8301F
MH8301F
MH8304F
MH8405F
-BOOT BAM System MOTOROLA
SPC5674
SPC5777
-BOOT MODE Fujitsu
-BOOT MODE Hitachi

Additional Package For Automatic Transmission
Full Read And Write TCU(MICRO + EEPROM)
TCU CLONING
TCU CODING FUNCTIONS

KT200 ECU Programmer Multiple Connections:


Package Includes:
1pc x Master
1pc x BENCH box
2pcs x OBD wires
1pc x pinout line
4pcs x BOM adapters
3pcs x Transfer cables
4pcs x Power wire
1pc x Set of resistors
4pcs x Adapter plugs
5pcs x Power adapters

Please register and login at first.

Once you finish shopping, all the items you wish to purchase are added to your basket. Your next step will be to go through the checkout process and make payment. Please do as follows.

(1)Click the "Add to Cart" button of all the products you need.
(2)Click the "Cart" button at the top of top right corner.
(3)Confirmed the products you choose and press “Check Out” button.
(4)Fill in your Shipping Address, Shipping Method and Payment Method, then press “Next” button.
(5)Confirm all the information again and press “Submit” button.
(6)Complete the payment checkout procedure using your preferred payment method.

(7)we will send you a confirmation email with all the details within 24 hours (except holidays)

You may compete your payment through HSBC Bank, Western Union, Paypal, Money Gram, National Australia Bank, Bank of China, Bangkok Bank, Sigue or Alipay. Please see the details in our payment options.

Our price is variable according to your purchasing amount or promotional activity. Prices may be changed when service representative email Shipment Confirmation to you.

Unless there are obvious mistakes, the price of the Products is subject to that indicated on this website. Although we make our best endeavor to make sure the accuracy of the price, errors may occur. If we found that the Products you ordered are with a wrong price, we will inform you as soon as possible. After being informed, you are entitled to re-confirm the correct price or cancel your order. If we cannot reach you, your order will be deemed as cancelled. Your payment will be fully refunded.

If your original order qualified for free shipping, you may be issued a full refund less our original shipping costs.

Please exercise reasonable care while you are in possession of the Products. If your use of the Products has exceeded the needs for inspection and confirmation of its quality and function, which caused the value of the Products are depreciated, for instance, the Products are dirty or damaged, we will reject your return.  

You may contact a service representative of Hua Shi Locksmith House to assist you with product return.

In circumstances where you consider that the Product are defective, please contact a service representative promptly with details of the Product and its damages. In addition, you could also contact us by sabine@lockpick.me to receive return instructions. Defective products will be refunded or exchange.

If your order was shipped via  DHL, please contact your local DHL office immediately. Please retain the carton, packaging, and damaged contents for DHL inspection. Then contact your service representative of Hua Shi Locksmith House to assist you with product replacement. All claims must be filed within 5 days after the receipt of order.